We’re giving away this carbon fiber funnel…

A few months ago, there was a pretty funny post on Audizine involving a funnel (I’m sure a few of you know what I’m talking about). To celebrate what has become an inside joke on the forums, we went ahead and made the worlds best carbon fiber funnel and we’re giving it away to one of […]

First pictures of “OEM” vent & MMI pieces installed…

I have been promised better pictures this weekend when the owner has a bit more time to take proper ones. He says he is very happy with the pieces.  They all fit perfectly and the install was “a breeze.” He did note that there were some subtle differences between the fabrics but they are unnoticeable once the […]

First “OEM” vent and MMI pieces finished…

and I couldn’t be happier.  I’m sorry these aren’t the best photos, but I wanted to post these up today because of how great they turned out.  I’ll get the mini studio setup later this weekend and take some better photos and post them on Monday. MMI piece re-assembled.  I will not be including the […]

Making simple molds for the B8 vent and MMI pieces…

Over the past few weeks I’ve been working on various improvements to help with the production of the B8 “OEM” carbon fiber vent and MMI pieces.  I spent the last day or so making simple foam molds that help support the pieces under vacuum.  Previous brackets would cave in under full vacuum.  Running the pump […]

“OEM” B8 Vent and MMI trim production – part 2…

We’ve made a bunch of progress on these pieces in the last week or so. First and foremost, we got the bag system running multiple parts now.  We’ve also made an upgrade to the molds that I’ll detail in a separate post because it is a neat little process. We’ve also had to deal with […]

e90 BMW carbon fiber trim production…

We just started our first official set of BMW carbon fiber trim.  It’s for a 2006 e90 325i sedan.  We decided to wrap it in an upgraded 20oz 2×2 twill fabric to make sure the trim really stood out.  Once this is done we’ll start an e92 set (hopefully from an M3) and it will […]

few more interior shots from the adam’s rotors S8

We have a few more interior shots from the Adam’s Rotors feature on StanceWorks.  A full, detailed write up can be found here: http://www.stanceworks.com/2011/02/rotors8/ This set was a custom made 9oz plain weave.  I’ve only done a few sets in this particular fabric, so it’s pretty rare.  The Adam’s Rotors logo embedded in the epoxy […]