e90 BMW carbon fiber trim production…

We just started our first official set of BMW carbon fiber trim.  It’s for a 2006 e90 325i sedan.  We decided to wrap it in an upgraded 20oz 2×2 twill fabric to make sure the trim really stood out.  Once this is done we’ll start an e92 set (hopefully from an M3) and it will get the same treatment.  Stay tuned for more details and pricing…

 

First we took the stock wood set, sanded it down to make room for the carbon fiber, and added a coat of bonding epoxy.

Once the epoxy had firmed up a bit, we began to wrap the pieces in the 20oz 2×2 twill fabric.

Next comes the long process of slowly building up the epoxy on the surface to give the pieces depth.

That’s all for now.  I’ll post more pictures after the epoxy has cured and the pieces have been trimmed, sanded, and cleaned up for clearcoat.

Leave a comment

Your email address will not be published. Required fields are marked *