oCarbon

Carbon Fiber Products

Blog

More progress on the custom Q7 set…

A ton of progress on the Q7 set has been made.  Sanded, trimmed, and clearcoated.  It will be polished and shipped out in the next few days.

All of the pieces have the extra fabric trimmed from the edges.

At this point the pieces were still pretty lumpy, so they were block sanded smooth.

Getting cleaned up for clearcoat.

After a few coats of clear, they are looking fantastic.  After the clear has set in a few days, all the little imperfections will get buffed and polished out.

Couple of quick shots of a custom 4×4 Q7 set…

This is the first Q7 set we’ve done at oCarbon and it is a beauty.  It was done in a 4×4 twill and so far is looking fantastic.  Currently it is being trimmed and sanded and will be clearcoated in the next few days.  Won’t be very much longer before it is finished up and installed.

Few shots of the door pieces.  These pieces are particularly interesting because they have LED lighting underneath them.  Should be a very cool effect once they are installed.

Last few photos are of the shifter surround.

Page 1 of 11