oCarbon

Carbon Fiber Products

Blog

First installed pictures from a 996 Porsche…

Big thanks to my friend Joey at EuroAddiction for being the first to get some parts made for his 911 GT3 as well as Angela Pappas at Fl@sh Photography for taking the time to get some pictures done for us.

These parts were made with a custom 20oz 2×2 twill fabric, which uses almost 4 times as much individual strands of carbon fiber than a standard weave.  More strands equals a thicker, tighter weave.

I’ve got more parts in the works for this car, so keep your eyes open for those soon.  If you’re interested in having parts made for your Porsche, fill out our custom quote form and we can get you setup.

Full gallery can be found here:

http://ocarbon.com/gallery/porsche/joey

More Porsche 996 GT3 parts finished…

Got another round of Porsche GT3 parts done for my buddy Joey.  After he gets these installed he’s promised a bunch of installed pictures, which I’m really looking forward to.

Up first is the speedometer cluster surround (it is upside down in this picture).  It is some times called “the Batwing” for obvious reasons.

Up next are the door pulls.  These will mate up with the map covers we made previously.

Last but not least, are thin strip pieces for the dash.

Our first set of Porsche pieces are finished…

I made these pieces for a former Audi customer of mine.  He was one of the first Audi’s to get a set made in the 20oz 2×2 twill (probably the first B6S4 owner to have it done).  2 years later, him and I are good friends and when he sold his B6S4 and stepped into a 911 GT3, I knew I’d have to make some parts for it.

These parts are just the first few of many that I’ll be making for him.

Up first is the radio surround.

Followed by the map covers for the doors.

Hazard surround.

Last, but not least, the ignition surround.

We’ll have many, many more parts for this particular Porsche in the coming weeks, expect a full photoshoot and new product pages in a month or two.

 

Page 1 of 11