oCarbon

Carbon Fiber Products

Blog

Same progress on the B5 carbon kevlar sets…

Almost done adding resin to these pieces.  After they cure I can start sanding them smooth.

Progress on the B8 carbon kevlar sets…

With a little bit of resin on the pieces you can start to see their true color (especially compared to the pieces with just raw fabric).  These pieces will be going in the oven for cure in the next few days and then sanded smooth.  After that, they’ll be ready for clearcoat.

More colored sets, this time for the B5…

I’ve done a few blue and red carbon kevlar sets for the B8 recently, so I figured I’d give a go at some colored B5 sets.  These sets are in the beginning stages of production and will darken up considerably once the resin and clearcoat has been applied, but you can get a good idea of what they will look like in their raw form.

Few more 5HS carbon fiber teaser shots…

Few more pictures of a finished 5HS carbon fiber.  It will be getting installed this weekend so I should have tons of good pictures of it in the car very soon.

Just started some colored carbon/kevlar B8 sets…

The camera doesn’t really do these pieces justice (my cheapo digital that is covered in resin coupled with fluorescent lights in the warehouse).  The look like a bright red and blue, but in person they are more of a deep, subtle color.  Once I add the resin, they will darken up a bit as well.

I’ll continue to post pictures of these sets as I run through the production stages.

Page 5 of 10« First...34567...10...Last »