oCarbon

Carbon Fiber Products

Blog

Some red and blue pieces clearcoated

We were able to get the two custom carbon kevlar sets we’ve been working on clearcoated today.  Very happy with the results.

Before we start, the pieces look almost matte as they have been sanded down to 800 grit to make a nice, smooth surface for the clear to adhere to.

Only going to need a little bit of clearcoat for these sets.

First up in the booth are some ashtrays.

Look at that shine.

Carbon Fiber Funnel Scavenger Hunt

Want to win our carbon fiber funnel?  We’re giving it away to the first person who can win our little scavenger hunt.  First person to post the correct answer in response to this post on our Facebook page will get the funnel.  Only one guess per person, so make your first guess count.

Ready to play?

Clues:

  1. We’re looking for a number.  It is a number between 1 and 1652.
  2. I have personally posted this number somewhere on the internet.
  3. Chances are, I posted this number on the oCarbon Facebook page, in the oCarbon blog, or on a major forum we sponsor (www.audizine.com, www.euroaddiction.net, www.ctsvowners.com, and www.cadillacforums.com).
  4. This number can be found in an image I personally posted.
  5. This image was posted in the last 3 months.
  6. The number takes up the majority of the image.
  7. The image contains a lot of the color red.
Good luck!

 

Red CTS-V set is done…

and it turned out great.  I’ll be wrapping these pieces up next week and shipping them off to their owner, so hopefully we see some installed pictures of this set real soon.

It is really hard to capture the color with a camera, but I did my best:

In certain lights, the red looks dark and almost black.

But if you catch it at the right angle, the red starts to peek through.

The center console was done in black, to compliment the rest of the red trim.

The small cover under the radio.  We’ll add the chrome tab right before we put it back together.

The radio piece.  I’m really happy with how this turned out.

Silver carbon fiber set for a C5 RS6

I’m just about to start polishing these silver pieces for an RS6 and figured I’d snap some pictures since they look so good.

This set is going into a white C5 RS6 with a black interior, so I think the silver carbon is really going to set it off.  Hopefully we get some nice pictures of everything installed.

We’ve also got a set of black 20oz 2×2 twill c-pillars going on this car:

A few pictures of some of the finished silver carbon fiber pieces…

we’ve done lately.

B8 Audi:

B6/B7 Audi:

We’re also working on silver sets for a C5 Audi RS6 and a B5 Audi S4, so keep a look out for those on the blog.

Page 2 of 1012345...10...Last »