oCarbon

Carbon Fiber Products

Blog

A few more quick shots of the 1 series trim before it got shipped out…

Finished polishing the 1 series trim and snapped a few more pictures of it before I packaged it up and shipped it off to its new owner.  Should be there in a few days and hopefully we can get some good installed pictures of it.

Just got done with some sweet carbon B8 center caps…

Made these for an RS5 owner, but I’m pretty sure they will fit quite a few B8 wheels. I’m really happy with how they turned out and can’t wait to see what they look like installed. You might remember some of our previous B8 center caps.

Starts off as a bare cap, wrapped in carbon. Having to drill out the holes for the chrome bits was pretty time consuming.


The chrome around the edge snaps into place and the rings are glued in from behind.





CTS-V trunk trim teaser…

We’ve been working on a CTS-V carbon fiber trunk trim for a customer that already has a set of interior trim.  We finished it up last week and it is on the way to him.  Once he gets it installed, I’ll post some more pictures.

Here it is all finished up.

We took the original trunk trim and ground it down to make room for the fabric and epoxy.  We went with a custom fabric to match the customer’s interior trim.

At first we were just going to wrap the front of the piece and paint the bottom black.  But then we decided that would make the part incomplete and the CTS-V deserved better, so we wrapped the entire part and planned on cutting out holes for the trunk latch and the plate lights.

The customer requested that we remove the Cadillac logo, so we filled it in and sanded it smooth.  The logo can no longer be seen.

Added several coats of epoxy.

Sanded smooth and clearcoated.

And the finish product.

Check out this custom red A3 set we’re working on…

It is only the second A3 set we’ve ever made, and it just happens to be made out of red carbon/kevlar.  We’re also doing the A frames that surround the shifter, but those are going to take a bit longer.

Stay tuned for installed pictures.

 

 

Silver “carbon fiber” B6/B7 trim set for sale…

I’ve got this silver texalium all finished up and ready to go.  It is available for immediate purchase and can be shipped out the day after payment is made.

This texalium is actually an aluminum coated fiberglass (real carbon fiber can’t be colored or dyed) and is commonly called silver carbon fiber.  I don’t make many of these sets: this is only the second silver B6/B7 set I’ve ever made and I don’t anticipate making that many more of them, so this is a pretty rare/custom set.

Email me at matt@ocarbon.com if you’re interested in picking this up or if you have any questions.

Price: $600

Shipping: Free

Core deposit:  $250 – this is refundable.  Once you install the silver carbon fiber trim you can return your original trim back to us and the $250 will be refunded in full.

Pieces included:  Full 9 piece set with a manual shifter.

Pictures:

Some more in a different light:

Page 1 of 1012345...10...Last »