oCarbon

Carbon Fiber Products

Blog

First installed pictures from a 996 Porsche…

Big thanks to my friend Joey at EuroAddiction for being the first to get some parts made for his 911 GT3 as well as Angela Pappas at Fl@sh Photography for taking the time to get some pictures done for us.

These parts were made with a custom 20oz 2×2 twill fabric, which uses almost 4 times as much individual strands of carbon fiber than a standard weave.  More strands equals a thicker, tighter weave.

I’ve got more parts in the works for this car, so keep your eyes open for those soon.  If you’re interested in having parts made for your Porsche, fill out our custom quote form and we can get you setup.

Full gallery can be found here:

http://ocarbon.com/gallery/porsche/joey

More Porsche 996 GT3 parts finished…

Got another round of Porsche GT3 parts done for my buddy Joey.  After he gets these installed he’s promised a bunch of installed pictures, which I’m really looking forward to.

Up first is the speedometer cluster surround (it is upside down in this picture).  It is some times called “the Batwing” for obvious reasons.

Up next are the door pulls.  These will mate up with the map covers we made previously.

Last but not least, are thin strip pieces for the dash.

Page 1 of 11